Breckwell SPC50 Installation Manual download pdf (Page 3)

Fuel Burn Rate* (lowest setting)

1 Lb/Hr

Burn Time (lowest setting)

60 Hrs

Hopper Capacity

60 lbs. ( 27kg)

HEATING SPECIFICATIONS

Height 29

Width 31

Depth 29

Weight 360

DIMENSIONS

Electrical Rating 120Volt, 60Hz, 8Amp

Watts 96

ELECTRICAL SPECIFICATIONS

FUEL CONSIDERATIONS

Your pellet stove is designed to burn premium hardwood pellets that comply with Association of Pellet Fuel Industries standards.

(Minimum of 40 lbs density per cubic ft, 1/4” to 5/16” diameter, length no greater than 1.5”, not less than 8,200 BTU/lb, moisture

under 8% by weight, ash under 1% by weight, and salt under 300 parts per million). Pellets that are soft, contain excessive amounts

of loose sawdust, have been, or are wet will result in reduced performance and excessive cleaning requirements of your appliance

and ﬂ ue.

Store your pellets in a dry place. DO NOT store the fuel within the installation clearances of the unit or within the space required

for refueling and ash removal. Doing so could result in a house ﬁ re.

Do not overﬁ re or use volatile fuels or combustibles, Doing so may cause personal and property damage hazards.

* Pellet size may effect the actual rate of fuel feed and burn times. Fuel feed rates may vary by as much as 20%. Use PFI listed fuel for best results.

SPECIFICATIONS

CONGRATULATIONS!

You’ve purchased a heater from North America’s oldest manufacturer of wood burning products.

By heating with wood you’re helping to CONSERVE ENERGY!

Wood is our only Renewable Energy Resource. Please do your part to preserve our wood

supply. Plant at least one tree each year. Future generations will thank you.

1 2 3 4 5 6 7 8 ... 27 28

Comments to this Manuals

No comments

Breckwell SPC50 Installation Manual Page 3

Comments to this Manuals